YSE-628 Wireless Network Intelligent Static Electricity Monitoring
Equipment Grounding Monitoring Solution
Factory setting of equipment monitoring device: 4Ω, accuracy ±2%,
Adjustable range of equipment channel resistance: 0--50Ω, accuracy ±5%
The metal casing of electrical equipment may be charged due to insulation damage. In order to prevent this situation from endangering personal safety and avoiding electric shock accidents, the metal casing of the electrical equipment is connected to the grounding device for protection. When the human body touches the electrical equipment with the casing already charged, since the contact resistance of the grounding body is much smaller than the human body resistance, most of the current enters the earth through the grounding body, and only a small part flows through the human body, which will not cause harm to human life.
1. The equipment is connected to the grounding wire through the terminal, with high reliability and real-time display of resistance.
2. The equipment/grounding wire is connected to the ESD intelligent electrostatic monitoring system, real-time data monitoring, immediate alarm for abnormal conditions, and historical values queried through the software. The data is true and reliable, and can be directional rectification, reduce risks, and improve production yield.
YSE-628 Wireless Network Intelligent Static Electricity Monitoring
Wrist Strap Monitoring Solution
Through the two-wire anti-static wrist strap, the monitor can accurately and continuously monitor the resistance between the two wrist strap wires and the two contact points of human skin, and display it in a visual way, increasing the monitoring of the anti-static wrist strap grounding point.
Factory setting of wrist strap monitoring device: 750K--35MΩ, accuracy ±2%
Channel resistance adjustable range: 100K--100MΩ, accuracy ±5%
1. Integrated management of intelligent sensing and anti-static wristband monitoring. When the sensing personnel are not wearing wristbands, the terminal will continue to alarm. When they are wearing wristbands and the test resistance value does not exceed the alarm value, the indicator light will turn green and no alarm will be given. When the personnel leave, they only need to take off the wristband without unplugging the audio jack, which effectively increases the service life of the wrist and terminal. The 1~10S alarm delay anti-fool function can be set, and online modification is supported;
Sensing distance: 0.3m~0.8m
2. If any wristband status is abnormal, the alarm, wristband terminal, and software interface will continue to alarm until it returns to normal, and the data can be displayed in real time
3. Real-time data monitoring, data authenticity and reliability, reduce risks, and improve production yield
1. 8 series ion blowers include single/double/triple outlet ion blowers
2. 2.2-inch color screen displays balance voltage, address, air volume, network status, etc. at a glance;
3. There are power indicator lights and alarm indicators;
4. The function editing adopts a menu design, making the selection and editing of parameters simple and easy to understand;
5. Balance: fine-tuning correction can be performed, and the balance alarm value is adjustable;
6. The ion emission needle is plug-in design, and one can be replaced separately;
7. The front and rear windshields are snap-on and detachable, making maintenance more convenient;
8. The front windshield balance monitoring network uses a plastic protective device, and the balance detection is more stable and accurate;
9. It can be cleaned regularly, cleaned when the machine is turned on, and cleaned automatically;
10. Check the high voltage value: the high voltage value of the high voltage package can be checked on the locked main interface button.
11. Infrared remote control function: You can lock the button, change the wind speed, turn on and off, clean, and compensate (optional) through remote control;
12. Infrared sensing function: USB expansion function interface, with the sensor, the fan stops running when the operator leaves the post, and the automatic start/stop and start time can be set when the operator comes to work (optional);
13. The color screen displays the network status, balanced voltage, time, address and other information;
14. Support online upgrade: If the company's software update version can provide program download and burning;
15. Support mobile phone APP function: The mobile phone installed with our company's software can also query;
16. Timed power on and off: The time of timed power on and off can be set according to production needs, and five timed power on and off times can be set at the same time;
17. Support wireless networking: This type of product belongs to the Internet of Things terminal equipment, supports the networking of our company's monitoring software, and transmits data in real time;
18. Generate offline data: When the ion fan is not connected to the Internet, an offline data is automatically saved every hour. When you need to see the offline data, you can read it on the computer;
19. The rear wireless WIFI antenna can realize wireless network control. Our company provides network monitoring software, which can be customized and connected to the customer's MS system;
Technical Parameters
Specifications | YSE-F801 | YSE-F802 | YSE-F803 | ||
Name | DC single outlet ion blower | DC double air outlet ion fan | DC three-inlet ion blower | ||
Working power supply | Enter | 110-240VAC 50/60HZ | 110-240VAC 50/60HZ | 110-240VAC 50/60HZ | |
Output | DC24V/1A | DC24V/2.1A | DC24V/2.1A | ||
Current | Maximum | 0.56A | 1.0A | 1.5A | |
Minimum | 0.28A | 0.4A | 0.6A | ||
Power | Maximum | 13.60W | 23.80W | 36.60W | |
Minimum | 6.90W | 10.72W | 14.50W | ||
Color display | 7-speed air volume display/lock status display/network status display/high voltage value display/balance display/neutralization time display/infrared status display/date and time display/network parameter display/abnormal display/sleep display/cleaning status display (except 815)/ground resistance value display/alarm threshold display | ||||
Wind speed | Height | 2.8m/s | 2.8m/s | 2.4m/s | 2.7m/s |
Low | 1.1m/s | 1.1m/s | 1.2m/s | 1.5m/s | |
Air volume adjustment | 1-7 adjustable wind speeds | ||||
Overall dimensions W*H*D | 145*220*88mm | 145*220*88mm | 590*185*117mm | 900*185*117mm | |
Work Environment | Temperature | 0℃-45℃ | |||
Humidity | <70%RH | ||||
Ion display value calibration | 0±50V | ||||
Ion balance calibration | 0±50V | ||||
Balance voltage | 0±10V | ||||
Neutralization time | ≤ 1.2S | ≤ 1.2S | ≤ 1.2S | ||
Effective coverage (30cm) | 600mm*600 | 600mm*900mm | 600mm*1400mm | ||
Net Amount | 2.3Kg | 5.4KG | 7.5Kg | ||
Including packaging weight | 2.74Kg | 6.71Kg | 8.90Kg | ||
Fixed method classification | Desktop (Stand) | Suspension type (chain)/horizontal type (bracket) | Suspension type (chain) / horizontal type (bracket) | ||
Networking | Zigbee/LoRa | Zigbee/LoRa | Zigbee/LoRa | ||
Shell material | Iron | Iron | Iron | ||
Button setting function | Support | Support | Support | ||
Infrared remote control function | Support | Support | Support |
Anti-static test results
Operating voltage: AC220, test voltage: 1000V-100V, ambient temperature: 25℃ | |||
Test distance (CM) | 30 | 60 | 90 |
Measured static elimination time (S) | 0.5 | 1.2 | 2.5 |
Measured ion balance (V) | 0±5V | 0±5V | 0±5V |
Wind speed (1-7 levels) | 7 | 7 | 7 |
Notes:
1. The test data is based on the test results of CPM374 electrostatic tester.
2. Test according to IEC-61340-5-1 A.6
3. The test data will vary due to the environment, air, temperature and humidity during the test.
YSE-8 series static electricity removal ion blower solution
Features:
1. 8 series ion blowers include single/double/triple air outlet ion blowers
2. 2.2-inch color screen displays balance voltage, address, air volume, network status, etc. at a glance;
3. There are power indicator lights and alarm indicators
4. Function editing adopts menu design, making selection and editing parameters simple and easy to understand;
5. Balance: fine-tuning correction can be performed, and the balance alarm value is adjustable;
6. The ion emission needle is plug-in design, and one can be replaced separately;
7. The front and rear windshields are snap-on and detachable, making maintenance more convenient;
8. The front windshield balance monitoring network uses a plastic protective device, and the balance detection is more stable and accurate;
9. It can be cleaned regularly, cleaned when the machine is turned on, and cleaned automatically;
10. Check the high voltage value: the high voltage value of the high voltage package can be checked by pressing the button on the locked main interface.
12. Infrared sensing function: USB expansion function interface, cooperate with the sensor to stop the fan when the operator leaves the post, and the automatic start/stop and start time can be set when the operator returns to work (optional);
Can be customized or connected to the customer's MS system;
Anti-static test results
Operating voltage: AC220, test voltage: 1000V-100V, ambient temperature: 25℃ | |||
Test distance (CM) | 30 | 60 | 90 |
Measured static elimination time (S) | 0.5 | 1.2 | 2.5 |
Measured ion balance (V) | 0±5V | 0±5V | 0±5V |
Wind speed (1-7 levels) | 7 | 7 | 7 |
Notes:
1. The test data is based on the test results of CPM374 electrostatic tester.
2. Test according to IEC-61340-5-1 A.6
3. The test data will vary due to the environment, air, temperature and humidity during the test.
Some of the texts and images used on this website are from the public network or material websites. All unsigned images and texts are original, but the author can inform and claim them after discovering them. We will promptly sign them or handle them according to the author's wishes. If you fail to contact this website in time, this website does not assume any responsibility.