esd access control system, esd access control system manufacturer, esd anti-static access control system
What are the functions of the wing gate?
General functions
1. It has fault self-checking and alarm prompt functions, which is convenient for users to maintain and use;
2. The operating status of the programmable device can be programmed through the built-in small keypad on the main control panel;
3. Mechanical structure, induction dual anti-pinch function, when encountering resistance during the resetting process of the telescopic arm, it will automatically stop or stop the motor within the default time, and reset again after the default delay (until reset), and the force is very small (≤2Kg);
4. Sound and light alarm function: including illegal intrusion and tailing alarm;
5. Anti-collision function. When the gate opening signal is not received, the swing arm is automatically locked;
6. Telescopic arm synchronization function;
Wing gate
7. With automatic reset function, after the gate is opened, if no passage is made within the specified time, the system will automatically cancel the user's right to pass this time. The standard is automatic reset 5 seconds after opening;
8. The channel automatically opens after power failure and automatically closes after power on;
9. It can be connected with a variety of card reading devices and receive relay switch signals to work;
10. It can control the entry and exit of personnel in one direction or two directions;
11. Remote control and management can be achieved directly through the management computer;
Extended functions
1. Counting and alarm functions;
2. Lengthen the chassis and select the wing (telescopic arm) material.
(1) With self-reporting fault prompt function, convenient for users to use and maintain
(2) With passage indication and channel indication function
(3) With normally open button function
(4) With automatic opening of swing door when power off and automatic closing function when power on
(5) With line self-check function
(6) With illegal intrusion alarm function
(7) With triple anti-pinch protection function
(8) Entry and exit mode can be adjusted arbitrarily
(9) Closing time and method can be adjusted arbitrarily
(10) Can be used with Duoao elevator/parking lot/access control/consumption/and other smart cards
Understand the characteristics of the three-roller gate:
The three-roller gate, also known as the three-stick gate, is a kind of channel gate and an intelligent control terminal device for the entrance and exit of the pedestrian channel. It is specially used for gates where security checks or controls are required for personnel entrances and exits, such as canteens, hotels, office buildings, museums, gymnasiums, clubs, subways, stations, docks and other places.
Features:
1. Alloy aluminum or stainless steel rainproof box, compared with the pedestrian passage equipment such as swing gates, the three-roller gate is more cost-effective.
2. It has a personalized installation interface (such as card reader, indicator light installation, etc.), ensuring that the system integrator's control gate equipment is simple and convenient during installation.
3. The movement of the three-roller turnstile has an automatically adjustable hydraulic shock absorber. When the three-roller gate is operated, the sound is very small, there is no impact, and the gate rod automatically slows down and returns to the center. The surface of the movement is electroplated with yellow dichromate.
4. It can be programmed with gate control, one or two direction control (set by the user).
5. The base is fixed with expansion bolts.
